Nero Endüstri Savunma Sanayi A.Ş. Amerika Birleşik Devletleri, Bulgaristan ve Türkiye’de Ankara Merkezli olarak faaliyet gösteren Türkiye’de Savunma Sanayindeki en büyük alt sistem üreticilerinden bir tanesidir.
PATLAMA SÖNDÜRME SİSTEMLERİ
Wind farms located offshore are difficult to access and harder to repair. Consequently, the financial impact of offshore turbine fires can be much more significant than onshore incidents. It is vital that this is factored into risk management plans at a time when the US has set a target of reaching 30GW of offshore wind capacity by 2030, a goal that will cost tens of billions of dollars to achieve.
The increased cost of fires in offshore turbines is due to a number of factors including:
Industry experts say it is likely the cost of an offshore turbine fire will be double that associated with a fire in an onshore turbine. In the view of specialist energy consultancy, Coalesce Management Consulting, the costs associated with onshore wind farms are “significantly cheaper, sometimes costing half the price of an offshore wind farm.”
This means that replacing an individual offshore turbine damaged by fire will cost considerably more than replacing an onshore turbine. The bad news is that replacing an individual onshore turbine damaged by fire is becoming increasingly expensive, costing up to $9 million with 12-18 months of expected down time while a replacement turbine is secured. We can anticipate that a fire in an offshore turbine will incur costs significantly higher than that.
When a fire breaks out in a wind turbine, it is vital that the fire is tackled as quickly as possible. This is because, in only a few minutes, a faulty electrical component or an overheated gearbox can ignite a fire that leads to the total destruction of the turbine.
This presents a significant challenge in the case of onshore wind turbines that are in remote locations – and which could be more than 80 meters above the ground – because local fire departments are unlikely to reach the fire at all and will instead focus on mitigating the fire damage and stopping it from igniting the surrounding area. Imagine then if the wind turbine is situated out at sea, the challenges of extinguishing the fire are greatly exacerbated.
As already highlighted, offshore wind turbines pose bigger maintenance-related challenges than onshore turbines, yet fire risk is no less of a threat. Furthermore, higher wind speeds and the harsh corrosive environment at sea mean offshore turbines are more susceptible to damage than those onshore.
In harsh offshore environments, corrosion is a constant risk to the structural integrity of substations, foundations and turbine tower segments, according to wind engineering services company, CWind. Given that offshore wind turbines are more likely to be in a state of structural degradation than those onshore, a wind turbine fire is likely to cause more damage than a fire in an onshore turbine.
Due to the increased risk of structural damage, offshore turbines need more frequent maintenance repairs – these repairs are not only expensive, but also difficult to carry out in a timely manner because of weather and sea conditions. Consequently, these additional challenges make the presence of faulty electrical components – which can cause fires – more difficult to immediately address in offshore turbines, thus the risk is increased.
In order to reduce the risk of fire at your offshore wind farm, conducting an effective fire risk assessment (FRA) should be a priority. An FRA will limit potential damage to your offshore wind assets and mean you won’t incur millions in costs replacing turbines located at sea. Once a fire risk assessment is completed, the results should be shared with all stakeholders including colleagues responsible for personnel safety, your operations team and your finance team, as well as external providers of finance and insurance providers.
Technologies that can be used for fire protection in offshore wind turbines include fire detection, arc flash detection, and condition monitoring systems. While most technologies focus on fire prevention or detection, only fire detection and suppression systems mitigate fire damage once a fire has started. NERO systems target specific ignition sources in the wind turbine. This allows a flexible, modular approach to fire protection that can be customized for different turbine makes and models.
* Bu sitenin tüm içeriği; metin, grafik, logo, resim, fotoğraf, resim, teknik ve bilimsel çizimler, ses-video klipler, animasyon ve video kayıtları, programlar, bunlarla sınırlı olmamak üzere her türlü teknik unsur ve bunlara ilişkin her türlü haklar dahil olmak üzere, halen yürürlükte olan ve ileride yürürlüğe girecek olan Türkiye Cumhuriyeti Mevzuatı, Site ve içeriği ile doğrudan veya dolaylı olarak ilgili tüm Uluslararası Mevzuatlar tarafından korunmaktadır. NERO Endüstri Savunma Sanayi A.Ş.'nin yazılı izni olmaksızın yukarıda belirtilen unsurların kullanılması, alıntı yapılması, kopyalanması, çoğaltılması, dağıtılması, başka bir bilgisayara yüklenmesi, iletilmesi, değiştirilmesi, ticari amaçla elde tutulması kısmen veya tamamen, doğrudan veya dolaylı olarak, aynen veya değiştirilerek yasaktır. .Ş., söz konusu faaliyetleri teşvik etmek; bunlarla sınırlı olmayan ve bunlarla ilgili her türlü haksız fiil de yasaktır.
WhatsApp us